SeaSucker Roof Rack Review - 2018 Toyota Corolla- Video

Speaker 1: Today in our 2018 Toyota Corolla, we're gonna be test fitting the SeaSucker Monkey Bar roof rack system, and this is going to be part number 298-SX6000. These bars are 48 inches long. Attach to your roof without any other clamps or anything like that, that would go underneath your doorjamb here. Instead, it uses these suction mounts on both sides. These suction mounts do have 210 pounds of pull, so they are going to stay in place once they're installed.This is a great roof rack system to carry a wide variety of accessories to free up space inside your Corolla, like bike racks, cargo baskets, or cargo boxes. This is adjustable with these eyelets here on both sides back and forth to accommodate different crossbar spread. more

Watch Video

6/29/2018 7:47:28 AM

Rhino Rack Roof Rack Review - 2018 Toyota Corolla- Video

Speaker 1: Today, on our 2018 Toyota Corolla, we're gonna be doing a test fit on the Rhino rack 2500 series Vortex aero roof rack system, using part numbers RRVA118B-2 for the 46" long, black, aluminum crossbars. They're also available in silver with part number RRVA118S-2, part number RRLKVA. That's for the 2500 series legs. Finally, part number DK383 for the custom fit kit for the Corolla. This roof rack system's gonna be great for carrying your bike racks, kayak carriers, roof boxes, really any accessory you want to put on your roof. It features aero style bars, which compared to square or round bars, it's gonna be a lot quiet and you don't need a fairing. more

Watch Video

3/16/2018 3:38:39 PM

Thule Traverse Roof Rack Installation - 2017 Toyota Corolla- Video

Today in our 2017 Toyota Corolla, we're going to be test fitting the Thule square bar roof rack system, consisting of part numbers THLB50, these are the Thule load bars, part number TH480 these are the Thule Traverse roof rack foot backs, and part number THKIT1746 and this is the fit kit for the Corolla. The Thule low bar roof rack system is great for carrying a wide variety of accessories while freeing up space in your vehicle for you and your family. It can carry bike racks, cargo baskets, enclosed cargo boxes, ski and snowboard carriers, as well as water sport carriers for your kayaks or canoes. To cut down wind noise and drag, you can purchase the Thule fairing which is sold separately. The two bars have a carrying capacity of 165 pounds, although you always want to double check with your vehicle's manual to make sure it can withstand that weight. Also at our end caps here, we do have knockouts which you can install Thule lock cores in, which are also sold separately, so once you install this onto your roof, it's going to be secure to your roof as well. Now that we've gone over some of the features of the roof rack, let's go ahead and show you how it installs. We have our rear bar partially assembled. We'll show you how the rest of it goes together. more

Watch Video

4/10/2017 10:32:46 AM

Rhino-Rack RS 2500 Vortex Aero Roof Rack Installation - 2017 Toyota Corolla- Video

Today in our 2017 Toyota Corolla, we're going to be test fitting the Rhino Rack RS2500 roof rack system. Part number RRRS586B. This also comes in silver as part number RRRS586. The Rhino roof rack system is great for carrying a wide variety of objects on your roof and freeing up space in your vehicle for you and your family. It can carry bike racks, cargo baskets, cargo boxes, ski and snowboard carriers, as well as water sport carriers such as kayaks and canoes. It has these vortex arrow strips and that combined with the aerodynamic shape of the bars will cut down the wind noise and drag while you're driving. It also means that you can use accessories that fit into T-tracks for your roof. more

Watch Video

4/10/2017 10:32:38 AM

Rhino-Rack Euro Square Roof Rack Review - 2017 Toyota Corolla- Video

Today on our 2017 Toyota Corolla, we're going to be test fitting the Rhino-Rack Square Bar Roof Rack System, consisting of part numbers DS118B. This is the Rhino-Rack Square Bars along with the 2500 Series Roof Rack Legs and part number DK383, and this is the custom fit kit for the Corolla. The Rhino-Rack Square Bar Roof Rack System is great for carrying accessories on your roof while freeing up space for you and your family in your vehicle. While it does have a square bar design, you can purchase bearings 00:00:25 on the etrailer.com website. That will cut down wind noise and drag while you're driving. Both bars combined have a carrying capacity of 165 pounds, although always double check with your vehicle's manual to make sure it can withstand those weights. At the end, we have these two locking caps here. more

Watch Video

3/3/2017 4:13:40 PM

Rhino Rack Roof Rack Review - 2017 Toyota Corolla- Video

Today on our 2017 Toyota Corolla, we're going to be test fitting the Rhino-Rack Vortex Aero Roof Rack System, consisting of part numbers RRVA118B-2. These are the Rhino-Rack Vortex Aero Crossbars, 46" long. This also comes in silver, part number RRVA118S-2. We'll also be using part number RRRLKVA. These are the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars, and part number DK383 and this is the Custom Fit Kit for the Corolla. The Rhino-Rack Vortex Aero Roof Rack System is great for carrying a wide variety of accessories onto your roof, and frees up space in your vehicle for you and your family. It has these Vortex rubber strips here at the top, and that coupled with the aerodynamic design of the bar, will actually cut down wind noise and drag while you're driving. more

Watch Video

3/3/2017 4:13:31 PM

Rhino Rack Roof Rack Review - 2007 Toyota Corolla- Video

Today on this 2007 Toyota Corolla, we're going to be test fitting the Rhino-Rack vortex aero cross bar roof rack, part number RRVA118B-2. That will be the actual cross bars themselves. Part number RRRLKVA, that will be the feet. And part number DK004 and that'll be the clamps or fit kit that actually connects inside your vehicle. Now we have the front one installed, let's go ahead and show you how to install the rear one. Kind of have it partially assembled here, one side already done. When you get the kit, the fit kit itself comes with the rubber pads and the clamps. more

Watch Video

3/8/2016 12:24:52 PM

Inno Roof Rack Review - 2014 Toyota Corolla- Video

Today at our 2014 Toyota Corolla we are doing a test fit of the Inno Aero Bar Roof Rack. The Crossbar numbers are INXB100-2. The Flush Feet are INXS200. The custom fit pad and clamp are INK306. We have the first one already on, I'm going to show you how to install the second one. This is our crossbar, we have 1 and 1/2 of the feet already on. more

Watch Video

12/21/2015 2:42:35 PM

Inno Roof Rack Review - 2014 Toyota Corolla INB127- Video

Today on our 2014 Toyota Corolla, we have our NO Square Bars roof rack. It comes in three parts. Our NO square bar, part number INB127. Our foot pack, INSU-K5. And our fit kit, INK306. We have a first front bar installed. more

Watch Video

12/17/2015 5:01:34 PM

Rhino Rack Roof Rack Review - 2014 Toyota Corolla- Video

Today on our 2014 Toyota Corolla, we'll be doing test fit of the Rhino Rack Vortex Areobar Roof Rack. The crossbar numbers are rrva118b-2. The 2500 series leg are RRRLVK, and the custom clamps and pads are DK383. We have the first one already on. We're going to show you how to install the second one. Here we have our clamps and pads. We have our 2500 series leg. We have our caps, 40 legs, an end cap, and a key for the end cap itself. First thing we need to do is make a measurement: 15.7 centimeters. more

Watch Video

12/11/2015 10:26:18 AM

Thule Roof Rack Review - 2014 Toyota Corolla- Video

Today on our 2014 Toyota Corolla, we're going to be test-fitting the Thule Traverse Roof Rack System. We're going to be using part numbers THLB50, that's going to be for the 50-inch bars. TH480, that's going to be for the traverse foot packs and part number THKIT1746, that's going to be for Toyota Corolla custom foot pack that Thule puts together for us. Again, just a custom fit. It's got the custom fit pad and the clamps designed to fit the roof line of our vehicle. Now we already have our rear bar installed onto our vehicle and we have part of our front bar assembled and put together. Real quick, we just want to go and show you how to assemble the last foot pack and how to assemble it onto the bar. We're going to rotate this around you so you can get a better look at it. We got our foot pack here, again, this is going to be part number TH480, you're going to get four feet included in that. more

Watch Video

12/30/2014 6:12:50 PM

Thule Traverse Roof Rack Installation - 2013 Toyota Corolla- Video

Today on our 2013 Toyota Corolla, we'll be test-fitting the Thule traverse roof rack system, using part numbers THLB50, TH480, and THKIT1515. We'll begin our test fit by first placing the front bar onto the front of our roof. We'll need to measure ten inches from the front part of our front window, to the first part of our foot pack. We'll need to make this measurement on both the passenger and driver's side of the vehicle. This will insure that the front bar is perpendicular to the roof of our Corolla, and that the pads fit correctly on the roof line. With the front bar in position, we can use the included tensioning tool, which will turn the silver bolt on the inside of our foot, which will tighten down the clips up against the roof. When tightening, we want to alternate sides, so that the bar doesn't favor one side of the vehicle. With the front bar secured, we'll now place our rear bar onto the rear of our roof, and measure our load bar spread. more

Watch Video

2/11/2014 5:05:39 PM

Thule Traverse Roof Rack Installation - 2012 Toyota Corolla- Video

Today were working with a 2012 Toyota Corolla and were going to be test fitting a Thule Roof Rack System. Well be using the 50 inch square load bars, part number THLB50, the traverse foot pack, part number TH480, as well as the fit kit for our Corolla which is part number THKIT1515. Now we already have our load bars assembled according to the instructions and were not ready to mount them up on top of our vehicle. Well take our front load bar and set it up on top of our roof. To position it properly we need to measure 10 inches from the edge of the seal on the windshield to the leading edge of the traverse foot. Well make sure its the same on both sides, then we can use the included Accutite tool to tighten down the roof rack. more

Watch Video

8/31/2012 1:40:44 PM

Rhino-Rack Aero Roof Rack Installation - 2012 Toyota Corolla- Video

Today were working with a 2012 Toyota Corolla and were going to be test fitting a Rhino Rack roof rack. Well be using the crossbars, part number DA118, which are also available in black as part number DA118B, and the fit kit for our Corolla which is part number CK152. We already have our crossbars assembled according to the instructions so now were ready to fit them up on top of our vehicle. Well take the front bar assembly and set it up on top of our roof. To position the front bar correctly we need to measure 240 millimeters from the center of the door seam forward to the center line of our crossbar. Once weve made sure weve got this measurement set on both sides of the vehicle well take the included tool and tighten down the clamp bolts on either side. more

Watch Video

8/31/2012 1:37:16 PM

Rhino-Rack Aero Roof Rack Installation - 2011 Toyota Corolla- Video

Alright, today on this 2011 Toyota Corolla, we're going to test fit a Rhino Rack roof rack system. At this point, we've already pre-assembled our roof rack to the manufacturer's instructions, so the next thing you do is go ahead and open up the doors and put them on the place on the roof line. Well, I'm going to take our first crossbar, put it on the roof, and then we'll go ahead and measure out to make sure we hit the right spot for it. The first measurement, we're going to need to measure from the center of your door jamb to the center of your front cross rail. In this case, our measurement will be 9,29/64". But you always want to double check with the manufacturer's instructions when installing. more

Watch Video

11/16/2011 3:58:27 PM

  1